Grid+ V3 CAM-powered 6-Channel Digital Fan Controller
Finding the right mix between cooling and noise reduction can be complex and time-consuming, even for experienced builders. GRID+ provides a smart solution for advanced digital fan control: you can easily install and control your fans using the intuitive CAM dashboard.
Prefer to set your own fan profiles? CAM enables that, too. With GRID+, you won’t have to choose between silence and cooling–you’ll get the perfect balance of both.
SMART FAN CONTROL
If manual fan control is your preference, GRID+ V3 supports both voltage and PWM control, and you can choose a separate fan profile for each channel: Silent, Performance, Fixed, or Custom. Label each fan channel, build your own custom fan curves, and tune your system using the intuitive CAM dashboard.
Each channel automatically detects if you’ve connected a 3-pin fan or 4-pin PWM fan. GRID+ V3 includes two Y-splitter cables for installing additional fans.
For nearly silent operation, your custom profiles can use the 0dB feature on Grid+ V3 to disable fans completely when temperatures are within the safe limits of your build.
EASY AND DISCREET INSTALLATION
GRID+ V3 features a slim profile, measuring only 15mm in height, and includes a magnetic back, making it quick and easy to install; it even fits behind most motherboard trays.
ADAPTIVE NOISE REDUCTION
Our unique Adaptive Noise Reduction uses an on-board noise sensor to measure and learn the specifics of your system to find the ideal balance between fan speed and cooling. With up to a 40% reduction in fan noise level, you won’t need to waste time designing custom fan curves. Leveraging machine learning to improve its results, this will ensure your fan settings are always optimal, even if you change hardware.
125 x 78 x 15 mm (GRID+ Unit)
35 x 15 x 10 mm (Noise Detection Module)
Steel, Plastic, PCB
Magnet or 3M Dual Lock
Software via CAM
Fan Channel Quantity
3-pin or 4-pin PWM
Output Channel Voltage
12V with 4-pin Molex
3.5mm Audio Jack for Noise Detection Module
1 x Noise Detection Module
1 x 450mm Extension Cable for Noise Detection Module
1 x 600mm Micro-USB cable
1 x Molex Power Cable
2 x 1 to 3 Fan Splitter Cable
5 x 100mm Zip Tie
2 x 40x13mm 3M Velcro Tape
1 x 15x13mm 3M Velcro Tape
PC with open internal USB 2.0 port and Windows® 10 operating system recommended. Internet connection is needed to download CAM.
Some CAM features require Internet access, a valid email address and acceptance of our current Terms of Service.
There are no reviews yet.